Mold Testing Bellevue | Mold Inspection Bellevue | Indoor Air Quality Testing | Mold Laboratory Results | Reporting for Mold Contamination | Certified Mold Inspectors - Washington
  Mold picture from DIS-10 System is a mold photomicrograph of penicillium. Mold samples are recorded through mold photomicrographs for permanent documentation. Stachybotrys is the mold the general public is frequently refering to when asking about black mold or toxic mold. Digital Diagnostic System's mold photomicrograph.
AMI Serving Western Washington,

Bellevue, and the Eastside from

Puyallup to Mt. Vernon for mold testing & mold inspection.


(425) 770-4375


Certified Indoor Environmentalist (CIE)
American Mold Inspection  
 Certified Environmental Technician (CET)
Specializing in professional inspection and testing for black toxic mold with laboratory reporting.  
Rapid Testing Results- Reasonable Inspection Rates - QA/QC - Methods


BCMIS Associates Serving N. CA Greater San Francisco Bay Area providing mold surface and air sampling for mold contamination investigations


Residential-Commercial-Industrial-Mold Inspection-Mold Testing

American Mold Inspection provides complete indoor air quality mold inspections and mold testing in the greater Seattle Washington area. Washington Certified AMI Mold Inspectors serve Seattle, Bellevue, King County and Snohomish County in Washington State.

Indoor Environmental Mold Inspection and Mold Testing Services.  

Home   Mold Testing    Mold Inspection    Mold Services    Mold Links    Contact AMI    FAQs   


Mold indoor air quality can be tested in both commercial and residential locations. Mold inspections are sometimes needed after remodeling work.Mold inspections can be provided for real property transfers. AMI - Indoor Air Quality Mold Testing

Scientific studies have revealed that the air inside of homes and buildings can sometimes be more polluted than outside air. When mold is found thriving in indoor environments the health risk or hazard to susceptible individuals can increase significantly. At particular risk can be children, the elderly, or the chronically ill, and those who suffer from respiratory ailments such as allergies, or asthma.
Poor indoor air quality can be of greater risk to the elderly.

Some individuals are more susceptible to molds.

Mold is Everywhere and is a Part of Everyday Life

Mold Need Moisture to Thrive - For healthy indoor air quality, indoor environments should always be kept clean, dry, and as mold free as possible.
Visible contamination on interior wall. AMI
with Lab Reports
as Permanent
Records of
Mold Site



Fungal Contamination
Mold can be visible, or sometimes hidden. AMI mold inspectors can take both surface and air samples, including in/behind wall mold sample(s) collection for laboratory analysis.

Why Inspect and Test for Mold?

Mold inspections and mold testing services should always be considered when individuals, or businesses, suspect health risk, or hazard, to occupants in an indoor environment. American Mold Inspection specializes in indoor air quality mold inspection and testing services for these needs. AMI provides rapid response in emergency situations, attention to project timelines, quality assurance to residential and commercial clients, and provides fast, analytical laboratory results reporting. We are home mold specialists with service to Seattle and the Eastside, south to Puyallaup and north to Mt. Vernon.

Firefighters-water damage can create moisture where molds thrive. AMI Clearance Testing

Indoor Environmental Health and Safety and Insurance Claims can involve crisis management and investigations into such issues as water damage due to extinguishing fires, or severe weather, faulty construction, or plumbing. Remediation of fungal contamination may be required to assure occupant safety. AMI provides clearance testing to remediators but does no remediation work to assure the consumer of no conflict of interest.

Bipolaris mold photomicrograph with debris.
Digital Diagnostic Laboratories Online Mold Analysis System

Fast, Accurate,
AMI Mold Inspectors have over 55 Combined Years of Industry Related Experience: Construction, Property Insurance Claims, and Home Inspections - Including Certified Digital DIS-10 System Laboratory Training in Inspection and Sampling Protocols for High Standard Quality Assurance and Control.

AMI Provides Mold Inspection
and Testing Services Only

No Remediation Work Means
No Conflict of Interest

Serving Home Owners, Buyers, Sellers, Realtors, Insurance Companies, and all Private and Public Sectors

Laboratory Trained Digital DIS-10 System Users
Microscopy Technology
AMI Mold Inspectors have been trained by degreed laboratory analysts and educators in the use of the DIS-10 System developed by Digital Diagnostic Systems. The indoor environmental technology and laboratory services provided to trained inspectors provides quality assurance to consumers in need of professional mold inspection and testing services.
 Mold testing technologies for mold inspectors from Digital Diagnostic Systems. "AMI" DIS-10 System Mold Inspectors & Associates
are a part of a National Network of Independent
Indoor Environmental Specialists Dedicated to the
Promotion of Healthy Indoor Environments.
Digital Diagnostic Systems and Mold Laboratories.Digital Diagnostic Systems
Digital Diagnostic Laboratories

American Mold Inspection
Indoor Environmental Professionals
Serving Seattle, Everett, and the Eastside
  Call today

Telephone: 425.770.4375
E-mail: American Mold Inspection

Certified Indoor Environmentalist (CIE):
American Indoor Air Quality Assoc.

Certified Environmental Technician (CET): Digital Diagnostic Labortories




 Home     Mold Services     Mold Links     Contact AMI-WA-WA     Contact BCMIS-CA

Copyright © 2006 AMI. ©Microsoft Clipart/Photos
Photomicrographs and DIS-10 System and Graphics Copyright©2006 Digital Diagnostic Systems.